| |
|
|
Hitachi Kokusai Electric supplies
the complete bandwidth for every application, modified for frequencies
and applications as required by the customer. Here of course, combinations
of features are also possible, as are designs as single-mode, dual-mode
or broadband repeaters.
Indoor Repeater
For the amplification and transfer of the signal received from
the base station in enclosed zones, such as office buildings,
shopping centres and exhibition halls, the TG-921 Broadband
Repeater is ideally and universally applicable.
- Further Information |
|
|
Optical Transmission Booster
(RF reception)
This receives the signal from the base station and passes it via glass
fibre lines to booster units which then in turn provide the signal
for local reception. It is ideal when longer distances to the retransmission
point of the signal (2 km) must be bridged, e.g. in tunnels or subway
areas of airports, stadiums, etc.
Bi-Directional Repeater
Receives and amplifies the signal for passing to branched mobile phone
reception zones, e.g. in underground car parks.
Optical Transmission Booster PCS-1000
This receives the signal from the base station and passes it via glass
fibre lines to booster units. From here the signal can then in turn
be passed on to distributed mobile phone reception zones. For application
in extended screened areas such as tunnels or underground railways.
Frequency Converting Repeater
For reception and transmission of the signal to a receiver / transmitter
unit in an area of poor reception, such as in a valley or along the
coast.
Loop Cancelling Booster
Can transmit the signal from the base station to remote areas, e.g.
a valley, where it can be made available for reception on a number
of frequencies.
Roof Top High Power Common Amplifier
This unit is installed at a base station mast and is used as a transmitter
amplifier for the regional mobile telephone cell. In addition it can
receive signals and pass them on amplified to the base station.
|