| |
|
|
|
|
|
|
 |
CX-HD1000
Camera Adapter |
|
|
Optical serial digital transmission
(HD-SDI standard / 1.5 Gbps)
|
Intercom: 2 channels, each 5-pin
XLR, channel selection, MIC on/off, Volume Control |
|
Program Audio: 2 x PGM audio level
controls, Channel 1&2 intercom mix |
|
Power Out (for Teleprompter): 1 x
5pin, 230 VAC,
60-100 W, External Prompter Tally drive out (depending
on configuration) |
|
Microphone in: 2 Channels, Line or
Mic level, Phantom power on/off |
|
Return/Aux Switch: 2 channels, 4-input
remote AUX/VF (RET control) |
|
Video Inputs/Outputs: 1 x HD-SDI
out, 1 x HD/SD-SDI Cam or HD/SD-SDI Ret or SD-SDI
PPT switchable,
1 x SD Analog out (VBS/PPT) / Genlock (Tri-Level
Sync) switchable |
|
Other I/O: 1 x 29-pin Studio Adapter
Interface, 1 x 5-pin 12 VDC/1A Script Lamp Out,
1 x 5-pin VF AUX Return, 1 x 4-pin XLR 12 VDC Power
in |
|
Mass: 2.6 kg (4.8lbs) |
|
|
|
|
|
|
|
|
|
TU-HD1000
Camera Control Unit |
|
|
Digital triax high speed serial digital transmission
(HD-SDI standard / 1.5 Gbps)
|
Maximum Triax cable length
- with CCU power more than 900 m |
|
Outputs:
HD outputs 1080i/720p/50Hz/60Hz switchable |
|
3 x HD-SDI + 3 x HD-SDI/SD-SDI switchable,
1 x PIX Output (HD/SD switchable) |
|
SD-Analog outputs: 16:9 / 4:3 switchable |
|
3 x VBS 1 x PIX, 1 x WFM, component
(Y,U,V or RGB switchable) |
|
Digital return in: 1/2/3/4, HD-SDI
or SDI-SDI |
|
Analog return in: 1/2, VS or VBS |
|
Promter in, Genlock in |
|
Intercom: 2/4 wire |
|
R/G Tally |
|
WFM control |
|
MIC out: 1/2 |
|
PGM remote control
serial data 4 pin connector,
network control: RJ-45 TP/IP |
|
Dimensions: 216 (W) x 118 (H) x 400
(D) mm |
|
Mass: 7.9 kg approx. |
|
|
|
